Box Air Compressor

● DO place your air compressor on a completely flat surface such as a driveway or patio. Block the wheels with bricks to ensure that the air compressor does not move around while you are using it, especially if the wheels do not have breaks fitted.

● DON'T operate the air compressor until you have ensured that all of the hoses and fixtures are intact and that each connection is properly connected. Leaks and loose parts can cause serious injuries when you operate the air compressor.

● DO keep pets and people away from your air compressor while it is in operation. Operating air compressors are loud and can damage hearing, and they have many moving parts that can cause injuries. Children and pets especially should be well out of the way before beginning operation.

● DON'T wear jewellery or loose clothing when operating your air compressor as they can become entangled cause injury. Do not wear short-sleeve shirts or work trousers when working near your compressor, and be sure to always wear sturdy shoes to protect your feet.

● DO only fill your air compressor's fuel tank and engine oil tanks when the compressor is turned off and has had ample time to cool off. If you add oil or fuel when the air compressor's parts are still hot it could start a fire.

● DON'T ever use your air compressor to clean dust or dirt off of people or pets. The high velocity of air from an air compressor can very seriously damage your skin, eyes, and ears. These injuries can be life threatening and are not to be taken lightly under any circumstances.

● DO read your operation and product manual thoroughly to ensure safe operation of your air compressor.

● DON'T neglect the oil that lubricates your air compressor's motor. The engine oil should be drained and replaced as often as needed (see manual). Just like when you change the oil in your car, you should also change the oil filter when you change the oil for your compressor's motor.

● Do make sure all guards and shields are in place and in good working order before turning the machine on.

Keep things cool with ventilation
Compressors generate heat. In an enclosed space, this heat could build up and cause overheating. That’s why correctly dimensioned ventilation with the right number of openings is needed. Keep in mind seasonal temperature fluctuations to avoid freezing in winter. Also make sure the ventilation doesn’t bring dust to the compressor air inlet.

Leave room for service
Space is precious. However, for reliable performance, compressed air equipment needs to be serviced from time to time. Therefore, it’s important to leave enough space for a service technician to have good access to the machine, be able to use service tools and bring in components. A good indication for minimal free space is the width of a pallet on each side of the compressor.

Foresee the facilities
Some utility rooms are built around the equipment. If that is the case, don’t forget to include an access gate. For some interventions, a crane is required. If there isn’t one installed, Atlas Copco can bring in a mobile crane, but only if there is enough space to mount it.

The downside of heights
Some equipment is installed at height. This comes with some disadvantages. Access is usually more difficult and less safe. Make sure the platforms are generously spaced for a technician to move around the equipment safely. To lift heavy components, foresee a lifting crane of a scissor lift.

Build in safety
The layout of the utility will either ensure safe conditions for maintenance personnel, or cause extra risks. Hoses or cables crossing a passageway create a tripping hazard. When connecting the equipment, closely follow the tolerances and recommendations. When in doubt, your compressor manufacturer can advise you. When installing drains, make sure the water can get away.

Jiangxi Gas Compressor Factory began as Ganzhou Machinery Factory after the public-private partnership in 1951. It was renamed Ganzhou Machinery Factory in 1955, Gannan General Machinery Factory in 1958, and Jiangxi Gas Compressor Factory in 1969. Jiangxi Gas Compressor Factory was always at the forefront of the industry in terms of technical strength in the 1970s and 1980s. As a result, the First Ministry of Machinery Industry at that time designated Jiangxi Gas Compressor Factory to conduct research and production of many new models.